AEG GS60AV222 Notice D'utilisation page 59

7.2 Setting and starting a
programme
Setting mode
For some settings it is necessary that the
appliance is in setting mode.
The appliance is in setting mode when,
after the activation, all the programme
indicators come on.
If the control panel does not show this
condition, press and hold, at the same
time, button
til the appliance is in setting mode.
Starting a programme without
delay start
1. Open the water tap.
2. Press the on/off button to activate
the appliance. Make sure that the ap-
pliance is in setting mode.
3. Press the button of the programme
you want to set. The related pro-
gramme indicator stays on while all
the other programme indicators go
off.
4. Close the appliance door, the pro-
gramme starts.
Starting a programme with
delay start
1. Set the programme.
2. Press the delay start button again
and again until the indicator of the
number of hours you want to set
comes on. You can set 3, 6 or 9
hours.
• The delay start indicator comes on.
3. Close the appliance door, the count-
down starts.
• When the countdown is comple-
ted, the programme starts.
Opening the door while the
appliance operates
If you open the door, the appliance
stops. When you close the door, the ap-
and button un-
pliance continues from the point of inter-
ruption.
Cancelling the delay start
while the countdown operates
When you cancel the delay start, also the
programme is cancelled.
1. Press and hold, at the same time,
button and button
all the programme indicators come
on.
2. Set the programme again.
Cancelling the programme
1. Press and hold, at the same time,
button and button
all the programme indicators come
on.
Make sure that there is detergent
in the detergent dispenser be-
fore you start a new programme.
At the end of the programme
The end indicator comes on.
1. Press the on/off button to deactivate
the appliance.
2. Close the water tap.
If you do not press the on/off
button, the AUTO OFF function
automatically deactivates the ap-
pliance a few minutes after the
end of the programme.
This helps to decrease the ener-
gy consumption,
Important
• Let the dishes become cold before
you remove them from the appliance.
Hot dishes can be easily damaged.
• First remove the items from the lower
basket, then from the upper basket.
• There can be water on the sides and
on the door of the appliance. Stainless
steel becomes cool more quickly than
the dishes.
ENGLISH
59
until
until