Télécharger Imprimer la page

R&G FI0001BK Instructions De Montage

Les langues disponibles

Télécharger ce manuel

FITTING INSTRUCTIONS FOR FI0001BK FRAME INSERT

BMW R1200 GS RIGHT HAND SIDE ONLY

PICTURE A

THIS KIT CONTAINS THE ITEMS PICTURED AND LABELLED BELOW.

DO NOT PROCEED UNTIL YOU ARE SURE ALL PARTS ARE PRESENT.

Please note that the way the kit is packed does not necessarily represent the way of

mounting to the bike

(

)

HE PARTS SHOWN MAY BE REPRESENTATIVE ONLY

FOR CLARITY OF INSTRUCTIONS ONLY

FRAME INSERT (FI0001) (x1)

BUBBLE

STICKERS

(x4)

M6x25mm LONG BUTTON HEADED BOLT (x1)

Please note that in cases where kits are packed with rubber washers holding the components onto the bolt –

the rubber washers should be thrown away!

Page 1 FITTING INSTRUCTIONS FOR FI0001BK FRAME INSERT BMW R1200 GS RIGHT HAND SIDE ONLY PICTURE A THIS KIT CONTAINS THE ITEMS PICTURED AND LABELLED BELOW. DO NOT PROCEED UNTIL YOU ARE SURE ALL PARTS ARE PRESENT. Please note that the way the kit is packed does not necessarily represent the way of...
Page 2 TOOLS REQUIRED  4mm metric Allen key.  T30 Torx key. Right-hand side (as you sit on bike)  Remove the central bolt in position shown in picture ‘A’.  Fit the button headed bolt through frame insert so head sits in counter-bore. ...
Page 3 FRANCE INSTRUCTIONS DE MONTAGE DE L’INSERT DE CADRE FI0001BK BMW R1200 GS COTE DROIT Merci de noter que les pièces assemblées dans l’emballage ne sont pas nécessairement dans le sens du montage à réaliser sur la moto. OUTILS NECESSAIRES ...