R&G FP0140BK Instructions De Montage

Les langues disponibles

Télécharger ce manuel

FITTING INSTRUCTIONS FOR FP0140BK FORK PROTECTORS

THIS KIT CONTAINS THE ITEMS PICTURED AND LABELLED BELOW.

DO NOT PROCEED UNTIL YOU ARE SURE ALL PARTS ARE PRESENT.

Please note that the way the kit is packed does not necessarily represent the way of

Please note that in cases where kits are packed with a plastic tube separating components on the

HE PARTS SHOWN MAY BE REPRESENTATIVE ONLY

M6 NYLOC

NUT (x2)

(S0550) (x1)

CRASH-PROTECTOR

(B0442 M6) (x2)

BMW R1200GS 2013-

mounting to the bike

spindle bar (this tube should be discarded).

SPINDLE-BAR

SB103 305mm LONG

(S0550) (x1)

SPACER L/H

(S0661) (x1)

(

FOR CLARITY OF INSTRUCTIONS ONLY

SPECIAL BOLT

(H0046) (x1)

SPACER R/H

(S0662) (x1)

)

M6 WASHER

(x2)

(S0550) (x1)

CRASH-PROTECTOR

(B0442 M6) (x2)

Page 1 FITTING INSTRUCTIONS FOR FP0140BK FORK PROTECTORS BMW R1200GS 2013- THIS KIT CONTAINS THE ITEMS PICTURED AND LABELLED BELOW. DO NOT PROCEED UNTIL YOU ARE SURE ALL PARTS ARE PRESENT. Please note that the way the kit is packed does not necessarily represent the way of...
Page 2 TOOLS REQUIRED  Socket set to include 2x 10mm & 22mm sockets and wrenches. FITTING INSTRUCTIONS  Remove the axle bolt from the left hand side fork leg using a 22mm socket.  Replace this bolt with the bolt supplied in the R&G kit and tighten to the recommended torque setting.
Page 3 Instructions de montage FP0140BK Protections fourche BMW R1200GS 2013- Le kit contient les articles en photo et énoncés ci-dessous. Ne pas procéder au montage jusqu’à que vous soyez sûr que toutes les pièces sont présentes. OTEZ QUE LA FAÇON DONT LE KIT EST EMBALLE NE REPRESENTE PAS NECESSAIREMENT LA FAÇON DONT IL FAUT MONTER LES PIECES SUR LA MOTO...
Page 4 Outils requis  Clés plates 2x 10mm  Jeu de clés de 22mm. Instructions de montage :  Enlever le boulon d’axe du coté gauche du pied de fourche avec une clé de 22mm.  Remplacer ce boulon par le boulon fourni dans le kit R&G puis serrer au couple recommandé. ...