Walking With The Rollz Motion - Rollz Motion 2 Manuel D'utilisation

Figure 17: Set the adjustment handle in
the right position.
CAUTION
Always set both handles at the same height to maintain stability. When height is
incorrectly set, this may cause imbalance that may increase the risk of injury. If
the rollator is not adjusted to the correct height, it can lead to neck or back pain.

Walking with the Rollz Motion

Thanks to the ergonomic design, you can walk upright, stable and comfortable
with the Rollz Motion.
a. First make sure the handles are adjusted to the correct height. See above in
Adjusting the height for correct posture.
b. While walking, stand in between the handles and, if necessary, lean on the
Rollz Motion. This way you walk as close as possible to the walker, which
offers the most support (Figure 18) .
c. Keep your arms and hands relaxed, that prevents too much tension.
d. Keep an eye on your surroundings. Do not focus your eyes downwards, but
forwards, which improves the balance.
CAUTION
While you walk with the rollator, keep looking in front of you to determine a safe
route.
Figure 18: Walk upright close to the
rollator.
57