Rollz Motion 2 Manuel D'utilisation page 56

Figure 14: Rotate counterclockwise.
b. Slide the handles to the correct height (Figure 15).
c. To determine the correct height, stand between the Rollz Motion handles
with your arms hanging near the body. The handles should be at the height
of your wrists (Figure 12).
d. Check whether both handles are at the same height using the height
indexation.
e. Make sure the handles are positioned in a straight line above the frame of
the Rollz Motion, pointing forward.
f. Turn the adjustment handles clockwise to tighten them (Figure 16A
and 16B).
e. Place the adjustment handles vertically so that they point straight down.
You do this by gently pulling the adjustment handle outwards and turning it
to the correct position (Figure 17).
Figure 16A: Tighten the adjustment handles.
56
Figure 15: Set the correct height.
Figure 16B: Tighten