Attaching The Bag - Rollz Motion 2 Manuel D'utilisation

Attaching the bag

The bag under the seat can be put in place without any tools:
a. Unfold the Rollz Motion (see Folding and unfolding) and unpack the
bag.
b. Pull the Velcro off the two wide loops on the bag.
c. The bag is not symmetrical, the sides follows the shape of the frame.
Determine the front of the bag and place it under the seat (Figure 3).
d. Thread a loop through the recess in the plastic side plate, from the outside
to the inside. Secure the loop with the Velcro on the inside of the bag. Do
the same on the other side (Figure 4).
e. Press the Velcro on both sides of the bag against the Velcro on the plastic
side plates.
f. Things can be placed in the bag from the rear of the Rollz Motion.
g. The bag can carry up to 10 kg of items.
h. The bag can always stay attached to the Rollz Motion. Before folding the
rollator, the bag needs to be emptied.
3
Figure 3: Attach the bag.
NOTE
Do not place more than 10 kg in the bag.
What fits where?
1. Bag
2. Velcro loops
3. Recess in the side
plate
1
Figure 4:
2
Attach the Velcro loops.
51