Bosch PSR 7,2 LI Notice Originale page 32

OBJ_DOKU-27621-003.fm Page 32 Friday, August 29, 2014 5:03 PM
32 | English
exceeded, the electronic control switches off the power tool until the tem-
perature is in the optimum temperature range again.
Protection Against Deep Discharging
The lithium-ion battery is protected against deep discharging by the "Elec-
tronic Cell Protection (ECP)". When the battery is empty, the machine is
switched off by means of a protective circuit: The inserted tool no longer ro-
tates.
Working Advice
 Apply the power tool to the screw only when it is switched off. Rotat-
ing tool inserts can slip off.
Maintenance and Service
Maintenance and Cleaning
 Before any work on the machine (e. g., maintenance, tool change,
etc.) as well as during transport and storage, set the rotational direc-
tion switch to the centre position. Unintentional actuation of the On/Off
switch can lead to injuries.
 For safe and proper working, always keep the machine and ventila-
tion slots clean.
When the battery is no longer operative, please refer to an authorised after-
sales service agent for Bosch power tools.
If the machine should fail despite the care taken in manufacturing and testing
procedures, repair should be carried out by an after-sales service centre for
Bosch power tools.
In all correspondence and spare parts order, please always include the
10-digit article number given on the type plate of the machine.
After-sales Service and Application Service
Our after-sales service responds to your questions concerning maintenance
and repair of your product as well as spare parts. Exploded views and infor-
mation on spare parts can also be found under:
www.bosch-pt.com
1 609 92A 0UT | (29.8.14) Bosch Power Tools