Fixing/Attaching The Shoulder Strap; Operation; Switching On And Off; Adjusting The Telescopic Handle - FLORABEST FALHS 18 A1 Traduction Des Instructions D'origine

Fixing/attaching the shoulder strap

♦ Hook the shoulder strap
eye .
♦ Note the fact that one hand on the handle
with the padding
handle .
♦ Adjust the length of the shoulder strap to your
size so that carrying eye is at hip height when
hooked in place.
♦ In addition, you can adjust the height of the car-
rying eye at the telescopic handle by undoing
the hexagon socket head screw.
♦ To adjust the carrying eye the enclosed assem-
bly tool can be used.

Operation

NOTE
► Comply with regulations regarding noise pro-
tection and local rules. Using the appliance on
certain days (e.g. on Sundays and public holi-
days), during certain times (midday period,
night time) or in certain locations (e.g. health
resorts, clinics, etc.) may be restricted or pro-
hibited.
Switching on and off
NOTE
► Before using the hedge trimmer, the protective case
has to be removed from the cutter bar
Switching on:
♦ Press the safety lock-out
then press the ON/OFF switch
♦ The safety lock-out
FALHS 18 A1
into the carrying
and the other hand on the
.
, keep it pressed and
.
can be released now.
Switching off:
♦ Release the ON/OFF switch

Adjusting the telescopic handle

The telescopic handle
ously by means of the quick release
♦ Loosen the quick release by pulling it upwards.
♦ Adjust the length by pushing or pulling as
required.
♦ Close the quick release by pulling him back
down.
♦ Close the quick release again, thereby fixing
the desired working length of the telescopic
handle.
NOTE
► If the quick release
tension, this can be tightened with the assem-
bly tool !

Working position

NOTE
► The hedge trimmer can be operated in 4 differ-
ent working positions.
Lateral cutting:
Telescopic handle
retracted
.
can be adjusted continu-
.
do not have enough
High vertical cutting:
Telescopic handle
extended
65
GB