Loading Cutlery And Dishes - Electrolux GA60GLI220 Notice D'utilisation

– When you activate the multitab func-
tion, it stays on until you deactivate it.
To deactivate the multitab function and
use separately detergent, salt and rinse
aid
1. Press the multitab button, the multitab
indicator goes off. The function is deac-
tivated.
2. Fill the salt container and the rinse aid
dispenser.

LOADING CUTLERY AND DISHES

Refer to the leaflet 'Examples of Pro-
Clean loads'.
Hints and tips
• Do not put in the appliance items that
can absorb water (sponges, household
cloths).
• Remove the remaining food from the
items.
• Make soft the remaining burned food on
the items.
• Put hollow items (cups, glasses and
pans) with the opening down.
• Make sure that water does not collect in
containers or in bowls.
• Make sure that cutlery and dishes do not
bond together.
• Make sure that the glasses do not touch
other glasses.
• Put small items in the cutlery basket.
• Mix the spoons with other cutlery to pre-
vent them to bond together.
• When you put the items in the baskets,
make sure that the water can touch all
surfaces.
• Put light items in the upper basket. Make
sure that the items do not move.
• Water droplets can collect on plastic
items and non-stick pans.
Beer glass holders
The beer glass holders prevent beer
glasses to move while a washing pro-
gramme operates.
3. Adjust the water hardness to the highest
level.
4. Start a washing programme without
dishes.
5. When the washing programme is com-
pleted, adjust the water softener to the
water hardness in your area.
6. Adjust the quantity of rinse aid.
If you do not use the holders, fold them up
or remove them. You can also remove the
support.
Warning! Be careful when you
disengage or engage the support.
To remove the holders and the support,
do these steps:
1. Disengage the holders from the support
and remove them.
2. Push the support to the rear part of the
basket to disengage it.
electrolux 65