1
Overview
Inspection and
Contents Checklist
Introduction
The following information is intended to help you install the PANTHER and PANTHER
PLUS terminals and the various option cards. Please read the information thoroughly
prior to beginning installation. Only qualified technicians should perform any internal
wiring installation of options, or programming.
NOTE: ONLY the analog version of the PANTHER panel-mount terminal is approved for
use in Division 2 and Zone 2/22 areas. Refer to the PANTHER (Analog) Panel-Mount
Terminal Division 2 Installation Guide in the back of this manual for Division 2 areas.
Refer to the European Category 3 G/D Installation Guide, (*)16684500A, for Zone 2/22
Areas.
1. If the terminal's shipping container appears damaged upon delivery, check inside
for damage. File a freight claim with the carrier if necessary.
2. If the container was undamaged, unpack the container if you have not already
done so. Keep the original packing materials for future use.
3. Make sure the terminal package contains the following:
• PANTHER or PANTHER PLUS terminal (refer to model identification chart on the
next page to confirm you are working with the correct model)
PANTHER
Harsh Environment Terminal
(PTHN)
•
Installation Guide
•
Security Seal
•
Capacity Sheet Labels
•
Cursor Legends Labels
•
Address Labels
•
Hardware Kit
•
Documentation CD
PANTHER
Panel-mount Terminal
(PTPN)
•
Installation Guide
•
Security Seal
•
Capacity Sheet Labels
•
Cursor Legend Labels
•
Address Labels
•
Gasket
•
CE Indicator Label
•
Hardware Kit
•
Documentation CD
Chapter 1: Introduction
Overview
PANTHER Plus
Harsh Environment Terminal
(PTHK)
•
Installation Guide
•
Security Seal
•
Capacity Sheet Labels
•
Cursor Legends Labels
•
Address Labels
•
Hardware Kit
•
Documentation CD
(7/03) 1-1