Inserting/Changing Batteries - ADE Eni Mode D'emploi

Inserting/changing batteries

1. Push the locking tab towards the battery
compartment cover and remove the battery
compartment cover.
2. Insert the batteries as shown on the bottom
of the battery compartment. Observe the
correct polarity (+/-).
3. Slide the battery compartment lid back into
place until stop.
Suggestions for changing the battery:
‚ Battery replacement is necessary if the display
shows either a battery symbol or nothing at all.
‚ Only use the battery type specified in the
"Technical Data".
‚ Always exchange all of the batteries at the
same time.
‚ Dispose of old batteries in an environmentally
friendly manner, see "Disposal".
38