VOLTCRAFT GT-6000 Notice D'emploi page 61

Software and driver installation:
You can also obtain the latest version of the driver and software via the link for the current operating instruc-
tions (see page 6):
• Please download the "setupVoltcraftPAT" setup program to your computer and install the application.
• Run the "setupVoltcraftPAT" setup program by double clicking. This will install the driver for the GT-6000 and the
download program. Follow the on-screen instructions. After successful installation, it may be necessary to restart
the computer in order to load the drivers correctly. A "Voltcraft PAT software" shortcut will be placed on the desktop.
• Connect the USB-C data cable to the USB-C connection (12) on the GT-6000. Connect the USB-A connector to
an unused USB interface on your computer.
• Switch the GT-6000 off. To activate the USB interface, press and hold the save button (13) and the On/Off button
(15) at the same time. The device switches on and activates the interface. The USB plug symbol and "USB Conn"
appear on the display.
• The computer detects the device and displays a brief notification.
• Start the "Voltcraft PAT software" program by
double clicking on the program icon on the
desktop. The program starts.
• Select "Scan Ports", which will detect all avail-
able serial interfaces.
• Then, select the COM port to which your GT-
6000 is connected.
• In the example, this is COM5.
• Press 'Open Port'.
• The saved data can now be loaded into the
program via the 'Download' button.
• The downloaded data are displayed chrono-
logically in the lower area.
• The data can now be saved in a data format for
spreadsheet programs (.xls) using the "Excel"
button. The file name and the storage location
can be freely selected. Follow the on-screen
instructions.
61