Siemens 6SE7087-8KN50 Instructions De Service page 186

Definitions and Warnings
DANGER
1-6
Electrical, magnetic and electromagnetic fields (EMF) that occur during
operation can pose a danger to persons who are present in the direct
vicinity of the product − especially persons with pacemakers, implants,
or similar devices.
The relevant directives and standards must be observed by the
machine/plant operators and persons present in the vicinity of the
product. These are, for example, EMF Directive 2004/40/EEC and
standards EN 12198-1 to -3 pertinent to the European Economic Area
(EEA), as well as accident prevention code BGV 11 and the associated
rule BGR 11 "Electromagnetic fields" of the German employer's liability
accident insurance association pertinent to Germany.
These state that a hazard analysis must be drawn up for every
workplace, from which measures for reducing dangers and their impact
on persons are derived and applied, and exposure and danger zones
are defined and observed.
The safety information in the Storage, Transport, Installation,
Commissioning, Operation, Maintenance, Disassembly and Disposal
sections must also be taken into account.
6SE7087-7KN50
Operating Instructions SIMOVERT MASTERDRIVES
08.2008
Siemens AG