Installation Requirements; Tools And Parts; Options - Maytag MFW9600SQ0 Guide D'utilisation Et D'entretien

Masquer les pouces

Table Des Matières

Table des Matières

Les langues disponibles

Tools and Parts

Gather the required tools and parts before starting installation.

The parts supplied are in the washer drum.

Tools needed for connecting the water inlet hoses

Pliers (that open to 1⁹⁄₁₆" [39.5 mm])

Flashlight (optional)

Tools needed for installation

Open end wrenches 17 mm and 13 mm

Level

Wood block

Ruler or measuring tape

Parts supplied:

A. Drain hose form

B. Inlet hose (2)

C. Inlet hose washer (4)

Alternate Parts

Your installation may require additional parts. If you are interested

in purchasing one of the items listed here, call the toll-free

number on the cover or in the "Assistance or Service" section.

If You Have

You Will Need to Buy

Laundry tub or

Sump pump system (if not already

standpipe taller

available)

than 96" (2.4 m)

Overhead sewer

Standard 20 gal. (76 L), 30" (76.2 cm)

tall drain tub or utility sink and sump

pump (available from local plumbing

suppliers)

Floor drain

Siphon break, Part Number 285834;

additional drain hose

Part Number 8318155; and connector

kit, Part Number 285835

Drain hose too

4 ft (1.2 m) drain hose extension kit,

short

Part Number 285863

Water faucets

2 longer water fill hoses:

beyond reach of

6 ft (1.8 m) Part Number 76314,

fill hoses

10 ft (3.0 m) Part Number 350008