Würth EWS 28-A Traduction Des Instructions De Service D'origine page 18

EWS 28-A.book Seite 18 Donnerstag, 1. Februar 2018 3:04 15
For other applications such as cut-off grinding or brush-
ing with steel wire brushes, other vibration values may
result.
The vibration emission level given in this information
sheet has been measured in accordance with a stand-
ardised test given in EN 60745 and may be used to
compare one tool with another. It may be used for a
preliminary assessment of the vibrational impact.
The declared vibration emission level represents the
main applications of the power tool. However if the
power tool is used for other applications, with different
accessories or poorly maintained, the vibration emis-
sion may differ. This may significantly increase the
vibrational impact over the total working period.
An estimation of the level of exposure to vibration
should also take into account the times when the tool is
switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure level
over the total working period.
Identify additional safety measures to protect the oper-
ator from the effects of vibration such as: Maintain the
power tool and the accessories, keep the hands warm,
organisation of work patterns.
Declaration of Conformity
We declare under our sole responsibility that this prod-
uct is in conformity with the following standards or
standardization documents:
EN 60745-1:2009+A11:2010,
EN 60745-2-3:2011+A2:2013+A11:2014+
A12:2014+A13:2015,
EN 55014-1:2017,
EN 55014-2:2015,
EN 50581:2012,
according to the provisions of the regulations
2011/65/EU, 2006/42/EC, 2014/30/EU.
Technical file at:
Adolf Würth GmbH & Co. KG, Abt. PPT
Reinhold-Würth-Straße 12 - 17
74653 Künzelsau, GERMANY
Frank Wolpert Dr.-Ing. Siegfried Beichter
Head of Product Head of Quality,
Management, Authorized Signatory
Authorized Signatory
Künzelsau: 21.01.2018
18
Subject to change without notice