Würth EWS 28-A Traduction Des Instructions De Service D'origine page 17

EWS 28-A.book Seite 17 Donnerstag, 1. Februar 2018 3:04 15
Operating Instructions
Clamp the workpiece if it does not remain station-
ary due to its own weight.
Do not strain the machine so heavily that it comes
to a standstill.
Grinding and cutting discs become very hot while
working; do not touch until they have cooled.
Maintenance and Cleaning
Before any work on the machine itself, remove the
battery.
Always keep the machine and the ventilation slots
clean.
If the machine should fail despite the care taken in man-
ufacturing and testing, repair should be carried out by
a Würth Master-Service agent.
For all correspondence and spare parts orders, always
include the article number on the type plate of the
machine.
For the current spare parts list of this machine, log into
the Internet under "http://www.wuerth.com/
partsmanager" or ask for a copy at your nearest Würth
branch office.
Disposal
Electrical devices/tools as well as bat-
teries/rechargeable batteries may not
be disposed of together with household
waste. Electrical equipment and batter-
ies must be collected separately and
disposed of environmental-friendly at a
recycling facility. Check with the local authorities or
your specialist shop for recycling facilities and collec-
tion points.
Transporting Lithium
Batteries
Lithium-ion batteries are subject to the Dangerous
Goods Legislation requirements.
Transportation of those batteries has to be done in
accordance with local, national and international pro-
visions and regulations.
The user can transport the batteries by road without fur-
ther requirements.
Commercial transport of Lithium-Ion batteries by third
parties is subject to Dangerous Goods regulations.
Transport preparation and transport are exclusively to
be carried out by appropriately trained persons and the
process has to be accompanied by corresponding
experts.
When transporting batteries:
Ensure that battery contact terminals are protected and
insulated to prevent short circuit.
Ensure that battery pack is secured against movement
within packaging.
Do not transport batteries that are cracked or leak.
Check with forwarding company for further advice.
Warranty
For this Würth tool, we provide a warranty in accord-
ance with statutory/country-specific regulations from
the date of purchase (proof of purchase by invoice or
delivery note). Damage that has occurred will be cor-
rected by replacement or repair.
Damage caused by normal wear, overloading or
improper handling is excluded from the warranty.
Claims can be accepted only when the machine is
presented undisassembled to a Würth branch office,
your Würth sales representative or a customer serv-
ice agent for Würth pessure air and power tools.
Noise/Vibration Information
Measured values determined
EN 60 745-1.
Typically, the A-weighted noise levels of the tool are:
Sound pressure level 79 dB (A); Sound power level
90 dB (A). Uncertainty K = 3 dB.
Wear ear protection!
Overall vibrational values (vector sum of three direc-
tions) determined according to EN 60 745.
Rough grinding: Overall vibrational value
2 Uncertainty K =
a =5.5 m/s .
h
Sanding with sanding discs: Overall vibrational value
2 Uncertainty K =
a =2.5 m/s .
h
according to
2
1.5 m/s
2
1.5 m/s
17