Inserting The Covers And Height Adjuster - V-ZUG Cooler V200 Notice D'installation

u For unit side walls which are 16 mm thick, the spacers fit
against the unit recess on the hinge side.
Fig. 42
u For unit side walls which are 19 mm thick, the front sides
of the hinges are positioned flush against the front of the
unit side wall.
Fig. 43
u If necessary, use the adjustable feet to correct the tilt of
the appliance.
Fig. 44
u Screw on the appliance on the hinge side.
Fig. 45
* Depending on model and options
Installing the appliance in the recess
u Move the bracket so it sits flush on the side wall of the
cabinet recess. Tighten all the screws securely.
Fig. 46
u Break off the stop from the bracket on the handle side
and dispose of it.
14.3 Inserting the covers and height
adjuster
Fig. 47
u Put on the covers.
Fig. 48
u Slide the panel so that it sits flush with the side of the
cabinet wall.
59