Freezer Compartment Door; Moving The Door Hinge; Reversing The Door - V-ZUG Cooler V200 Notice D'installation

Tool for assembly: Spirit level
Tool for assembly: Size 7 and size 10
spanners
Two people are required for this
step.
Carry out this step at the marked
place on the appliance.
Aids for assembly: String
Aids for assembly: Square
Aids for assembly: Screwdriver
Aids for assembly: Scissors
Aids for assembly: Non-permanent
marker pen
Accessory kit: Remove components
Dispose of components that are no
longer needed.
12 **** freezer compartment
door*
It is very easy to reposition the hinge of the **** freezer
compartment door if the main door hinge is swapped. If the
main door of the appliance can be opened to more than 115°
(1), you can open the freezer compartment without reposi‐
tioning the hinge. If the opening angle (2) of the appliance
door is less than this, the hinge must be repositioned.
* Depending on model and options

**** freezer compartment door*

Fig. 5

12.1 Moving the door hinge

The slider for moving the door hinge is located on the back
of the **** freezer compartment door at the bottom.
Fig. 6
u Close the **** freezer compartment door (1).
u Grab the **** freezer compartment door from below.
u Move the slider (2) either to the right or to the left.

13 Reversing the door

Tools
NOTICE
Live parts
Damage to electrical parts
u Before changing the door hinge, disconnect the plug at
the mains.
Fig. 7
53