V-ZUG Cooler V200 Notice D'installation page 54

Reversing the door
Fig. 8
u Taking off the soft stop mechanism: Remove the soft
stop mechanism from the ball stud (1). Unscrew the
bracket (2). Remove the ball stud with a screwdriver (3).
Fig. 9
u Take off the lids.
Fig. 10
u Undo the screws on all the hinges but do not remove
them.
54
Fig. 11
u Removing the door: Push the door forward and then out,
unhook it and put it to one side.
Fig. 12
u Unscrew all hinges and set aside together with the
screws.
Fig. 13
u Detach the brackets from the top and bottom of the door
and move them. The bracket for the screw connection of
the hinges must be moved.
* Depending on model and options