Preparing The Recess And The Appliance; Aligning The Appliance In The Recess - V-ZUG Cooler V200 Notice D'installation

14.1 Preparing the recess and the appli‐
ance
Fig. 27
u Separate the floor mounting bracket at the perforation.
NOTICE
Correct installation depth of the appliance.
u Using the mounting bracket ensures the correct installa‐
tion depth of the appliance.
Fig. 28
u Screw the mounting brackets on the left and right of the
recess floor, flush to the side wall.
Fig. 29
u Remove the power cable from the package and plug it
into the back of the appliance. Use a string to route the
power plug cord to the accessible socket. Do not plug in
the power plug until the appliance is correctly installed.
* Depending on model and options
Installing the appliance in the recess
Fig. 30
u Insert the levelling panel on the top of the appliance. The
panel can be moved to both sides.
Fig. 31
14.2 Aligning the appliance in the
recess
Fig. 32
u Push the appliance 2/3 of the way into the recess.
Fig. 33
u Check whether the unit side wall is 16 mm or 19 mm
thick.
57