Working With The Appliance - SilverCrest SMPS 7 C2 Mode D'emploi

■ Cylindrical miller
For grinding off thick toenail surfaces and rough smoothing of the
surfaces.
You can use the cylindrical miller
nail surfaces.
♦ Always hold the cylinder miller
and apply light pressure and circular movements to remove the
excess growth.
■ Hardened skin remover
For large-scale and rapid removal of thick hardened skin or calluses
on the sole or heel of your foot.
♦ Guide the hardened skin remover
and heel to be treated while exerting gentle pressure.

Working with the appliance

WARNING – RISK OF INJURY!
Excessively long or intensive treatment can also
injure deeper layers of skin.
► Therefore, check the treatment progress and results regularly.
Diabetics in particular are less sensitive on their hands and feet.
NOTE
► The attachments do not have as much eff ect on softened skin.
Therefore, do not carry out any pretreatment in a water bath
before using the appliance.
│
■ 54 GB
:
15
:
16
to mill away thickly growing
15
parallel to the nail surface
15
over the parts of the sole
16
SMPS 7 C2