Kohler Sterling 600B Serie Guide D'installation page 10

Note: The steel side of roller must
be installed against frame.
(Outside Panel)
Smooth Side or
Pattern Side
8. Install the Rollers
NOTE: The steel side of the roller must be installed against the top frame flange.
Using #8-32 x 3/8" panhead screws, assemble two rollers on each panel.
Outside Panel - Install the rollers toward the rough side of the glass. If the glass has patterns, install
the rollers opposite the pattern side.
Inside Panel - Install the rollers toward the smooth side of the glass. If the glass has patterns, install
the rollers toward the pattern side of the glass.
1034038-2-B
Top Frame Flange
#8-32 x 3/8"
Panhead Screw
Screw
Roller
Roller
Bottom frame holes always
go toward shower.
10
Screw
(Inside Panel)
Smooth Side or
Pattern Side
Sterling