Ups Setting - INFOSEC UPS SYSTEM E4LCD1000 Mode D'emploi

3-5. UPS Setting

Value 1
 01: Output voltage setting
Interface
 02: Frequency Converter enable/disable
Interface
 03: Output frequency setting
Interface
04: ECO enable/disable

Interface
INFOSEC UPS SYSTEM – 4 rue de la Rigotière – 44700 Orvault – France – www.infosec-ups.com
35
Hot Line Tel : +33 (0)2 40 76 15 82 – fax : +33(0)2 40 94 29 51 – hotline@infosec.fr – 11 10 AA 59 203 04
All manuals and user guides at all-guides.com
Parameter
Value 2
Setting
For 208/220/230/240 VAC models, you may choose the
following output voltage:
208: presents output voltage at 208VAC
220: presents output voltage at 220VAC
230: presents output voltage at 230VAC
240: presents output voltage at 240VAC
For 110/115/120/127 VAC models, you may choose the
following output voltage:
110: presents output voltage at 110VAC
115: presents output voltage at 115VAC
120: presents output voltage at 120VAC
127: presents output voltage at 127VAC
Setting
CF ENA: converter mode enable
CF DIS: converter mode disable
Setting
You may set the initial frequency in battery mode:
BAT 50: presents output frequency at 50Hz
BAT 60: presents output frequency at 60Hz
If converter mode is enabled, you may choose the following
output frequency:
CF 50: presents output frequency at 50Hz
CF 60: presents output frequency at 60Hz
Setting
ENA: ECO mode enable
DIS: ECO mode disable
There are 8 programs to set up the UPS:
output voltage setting, frequency converter
enable/disable, output frequency setting,
ECO enable/disable, ECO voltage range
setting, Bypass enable/disable, Bypass
voltage range setting, programmable outlets
enable/disable, programmable outlets
setting and exit.