Spare And Wearing Parts; Disposal And Scrapping - Bosch BEA 550 Notice Originale

5. Maintenance
!
Work on electrical equipment is only to be
performed by persons with sufficient knowledge
and experience of electrical systems!
5.1 Cleaning
!
Do not use abrasive cleaning agents and coarse
workshop cloths!
¶
The housing and the LCD are only to be cleaned
using a soft cloth and neutral cleaning agents.
5.2

Spare and wearing parts

Designation
BEA 060
BEA 070
BEA 030
KTS 515
Robert Bosch GmbH
6.
6.1
In the event of lengthy periods of non-use:
¶
Disconnect the BEA 550 from the mains electricity.
6.2
¶
If the BEA 550 is passed on, all the documentation
included in the scope of delivery must be handed
over together with the unit.
¶
The BEA 550 is only ever to be transported in the
original or equivalent packaging.
¶
Unplug the electrical connection.
¶
Heed the notes on initial commissioning.
6.3
Order number
1. Disconnect the BEA 550 from the mains and detach
1 687 023 613 the power cord.
1 687 023 638
2. Dismantle the BEA 550 and sort out and dispose
1 687 023 577
of the different materials in accordance with the
1 687 023 479
applicable regulations.
Only for EC countries:
Maintenance | BEA 550 | 11 |
Decommissioning
Temporary shutdown
Change of location

Disposal and scrapping

BEA 550, accessories and packaging should
be sorted for environmental-friendly recycling.
¶
Do not dispose BEA 550 into household
waste.
The BEA 550 is subject to the European
directive 2012/19/EC (WEEE).
Dispose of used electrical and electronic
devices, including cables, accessories and
batteries, separately from household waste.
¶
Make use of the local return and collection
systems for disposal.
¶
Proper disposal of BEA 550 prevents
environmental pollution and possible
health hazards.
1 689 989 178
en
|
2022-07-24