Fimar FT/4N Emploi Et Entretien page 32

Les langues disponibles

▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ ELECTRIC FRYERS

APPLIANCE CLEANING

Before cleaning the appliance (at the end of the day or when necessary) turn power off

(or disconnect the power cord) and make sure the cook surface is fully cooled.

Appliance model FT/4N - FT/44N - FT/8N - FT/88N

– Remove the control panel complete with electrical resistances.

– Remove the chamber and drain oil.

– Clean the chamber and basket with food safe detergents, rinse and dry thoroughly as-

sembling them.

– Reassemble the control panel complete with electrical resistances.

– Accurately clean the work surface and all surrounding areas.

– Clean external appliance surfaces with a damp cloth or sponge.

Caution - Precaution

Do not pollute the environment with used oil and/or residue. Dispose waste accord-

ing to current laws in the country of use.

Only clean with food safe detergents. Never use corrosive or flammable cleaning

products or products that contain substances harmful to human health.

For long periods of disuse, after cleaning and turning off appliance power (or unplug-

ging the power cord), adequately cover it to keep it clean.

Appliance model FT/8RN - FT/88RN - SF/9N - SF/99N - SFM/13 - SF/16P - SFM/18 -

SFM/18D

– Place a container with suitable capacity under the drain faucet to avoid polluting the en-

vironment.

– Open the drain faucet to fully empty the chamber.

– Wash the chamber and basket with food safe detergents and rinse and dry thoroughly.