hestan KRP Serie Manuel D'installation page 29

LOCATION AND INSTALLATION
MOUNTING THE SAFETY ANTI-TIP BRACKET
To avoid danger of the appliance tipping over
it is mandatory to secure the appliance to the
wall by means of two special brackets.
1
2
3
(continued)
To avoid danger of the appliance tipping over when
opening full doors and drawers, it is mandatory to
install two brackets on the upper part of the appliance
for securing it to the wall.
The brackets should be applied as illustrated using the
provided screws and wall anchors.
Place the bracket on the top of the appliance relative
to the proper alignment to the wall.
Mark up the holes position on the wall.
Drill the wall with an 8 mm (3/8") bit and insert the
wall anchor.
3
Reposition the bracket and secure it rst to the cabinet,
then to the wall.
1
2
©2018 Hestan Commercial Corporation
EN
27