hestan KRP Serie Manuel D'installation page 28

LOCATION AND INSTALLATION
MOUNTING THE SAFETY ANTI-TIP BRACKET
EN
The built-in installation of two or more refrigerators requires an accessories kit, to be ordered separately:
To avoid danger of the appliance tipping over
it is mandatory to secure the appliance to the
wall by means of two special brackets.
" )
5 ⁄8
1
4 5 (
1
2
3
4
26
©2018 Hestan Commercial Corporation
(continued)
To prevent the appliance from tipping over, an extra-long kit
is available upon request if the appliance needs to remain
distanced from the wall, it is mandatory to install two
brackets on the upper part of the wall.
The brackets should be applied as illustrated using the
provided screws and wall anchors.
Place a bracket on the top of the appliance aligning it with
the secure location on the wall.
Mark up the holes position on the wall
Drill the wall with an 8 mm (3/8") bit and insert the
wall anchor.
3
Reposition the bracket and securely attach it rst to the
cabinet, then to the wall.
1
2
4