hestan KRP Serie Manuel D'installation page 21

LOCATION AND INSTALLATION
DOOR AND BOTTOM-DRAWER OVERLAY PANEL LAYOUT
OVERLAY MODELS (-OV)
PANEL DIMENSIONS - 24" AND 30" COLUMN REFRIGERATORS AND FREEZERS
AND KWCR/L24-OV MODELS
Panels with width ranging between 18 mm (3/4 in) and 28 mm (1 1/8 in).
Door panels with weight max of 34 kg (75 lb)
Exceeding these weights could void your warranty for any service issues which can be attributed
to overweight panels.
The hinge mechanism on Hestan refrigerators is considered to be `Zero-clearance`. The door
and drawer widths speci ed below assume the minimum niche width is being used and a
3.5mm (1/8") reveal is desired around the panels. Adjust your panel dimensions accordingly
to your own design criteria considering your niche width and your reveal. Minimum reveal
or gap should not be less than 1.5mm (1/16").
Door/Drawer Width
Models
30" Columns
747 (29 3/8")
24" Columns
597 (23 1/2")
KWCR/L24-OV
597 (23 1/2")
(continued)
Door Cutout Width
A
B
N/A
N/A
327 (12 7/8")
(continued)
135
(5 3⁄8" )
A
©2018 Hestan Commercial Corporation
EN
min 200(7 7⁄8" )
135
(5 3⁄8" )
B
19