hestan KRP Serie Manuel D'installation page 20

LOCATION AND INSTALLATION
DOOR AND BOTTOM-DRAWER OVERLAY PANEL LAYOUT
OVERLAY MODELS (-OV)
EN
PANEL DIMENSIONS - KRBR/L36-OV AND KRWR/L24-OV MODELS
Panels can have thickness ranging between 18 mm (3/4") and 28 mm (1-1/8").
Door panels can have a maximum weight 23 kg (51 lbs) and drawer panels may be a maximum
weight of 11kg (25 lbs).
Exceeding these weights could void your warranty for any service issues which can be
attributed to overweight panels.
The hinge mechanism on Hestan refrigerators is considered to be `Zero-clearance`. The door
and drawer widths speci ed below assume the minimum niche width is being used and a 3.5mm
(1/8") reveal is desired around the panels. Adjust your panel dimensions accordingly to your own
design criteria considering your niche width and your reveal. Minimum reveal / gap should not be
less than 1.5mm (1/16").
Models
KRBR/L36-OV
KRWR/L24-OV
Example:
84" cut-out height
36" cut-out width
4" toe kick height
1/8" gap desired all around
18
©2018 Hestan Commercial Corporation
(continued)
Door/Drawer Width Door Cutout Width
A B
897 (35 1/4") N/A
597 (23 1/2") 327 (12 7/8")
3 (1⁄8" )
(continued)
135
(5 3⁄8" )
A
Door panel:
Width: 35-3/4"
Height: 54-3/4"
Drawer panel:
Width: 35-3/4"
Height: 84"-1/8"-54-3/4"-1/8"-4"=25"
If you want a 6" toe kick height then your bottom drawer
panel height would be 23"
min 200 (7 7⁄8" )
135
(5 3⁄8" )
115 (4 ½")
B