hestan KRP Serie Manuel D'installation page 23

LOCATION AND INSTALLATION
MOUNTING PANELS TO THE DOOR AND DRAWER OF
OVERLAY MODELS (-OV)
1
2
3
Once all brackets and small brackets have been
applied to the panels, you can begin installing
the bottom drawer.
Partially tighten the screw as illustrated.
Attach the bottom drawer panels beginning with
the attachment brackets at the bottom rst
It is now possible to align panels to adjacent cabinets
in height using the lower alignment brackets,
tightening or loosening the screws into position as
needed. With the screw slightly tightened, move the
panel sideways to align it to the other panels on the
unit or other adjacent structures.
Depth alignment: working from the inside of the drawer,
after lif ting up the magnetic seal, adjust the panel
position so it is closer to or further away from the door
using the holes
holes.
4
5
(continued)
and then secure the panel using the
4
5
©2018 Hestan Commercial Corporation
EN
1
2
3
21