Product Description And Specifications; Product Features; Technical Data; Rechargeable Battery - Bosch GBH 180-LI Professional Notice Originale

Take care when carrying out demolition work using
u
the chisel. Falling fragments of the demolition material
could injure you or any bystanders.
Hold the power tool firmly with both hands and make
u
sure you have a stable footing. The power tool can be
more securely guided with both hands.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is intended for hammer drilling in concrete,
brick and stone, as well as for light chiselling work. It is also
suitable for drilling without impact in wood, metal, ceramic
and plastic. Power tools with electronic control and right/left
rotation are also suitable for screwdriving.

Product Features

The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) SDS plus drill chuck
(2) SDS plus tool holder
(3) Dust protection cap
(4) Locking sleeve
(5) Button for depth stop adjustment
(6) Release button for impact/mode selector switch
(7) Impact/mode selector switch
(8) Rotational direction switch
On/Off switch
(9)
(10) Handle (insulated gripping surface)
a)
(11) Battery
(12) Worklight
a)
(13) Battery release button
(14) Auxiliary handle (insulated gripping surface)
(15) Depth stop
(16) Button for battery charge indicator
(17) Battery charge indicator
(18) Universal holder with SDS plus shank
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.

Technical Data

Cordless rotary hammer
Article number
Bosch Power Tools
Cordless rotary hammer
Rated voltage
Rated speed
– Clockwise
– Anticlockwise
Impact rate
Impact energy per stroke ac-
cording to EPTA-Proced-
ure 05:2016
Tool holder
Max. drilling diameter
– Concrete
– Steel
– Wood
Weight according to EPTA-
Procedure 01:2014
Recommended ambient tem-
perature during charging
Permitted ambient temperat-
ure during operation
during storage
Recommended rechargeable
batteries
Recommended chargers
A) Measured at 20–25 °C with rechargeable battery ProCORE18V
B) Optimum performance with driling diameter 6−10 mm
C) Depends on battery in use
D) Limited performance at temperatures < 0 °C

Rechargeable battery

Charging the battery
u
Note: The battery is supplied partially charged. To ensure
full battery capacity, fully charge the battery in the charger
before using your power tool for the first time.
a)
The lithium-ion battery can be charged at any time without
a)
reducing its service life. Interrupting the charging process
a)
does not damage the battery.
The lithium-ion battery is protected against deep discharge
by the "Electronic Cell Protection (ECP)". When the battery
is discharged, the power tool is switched off by means of a
protective circuit: The application tool no longer rotates.
u
GBH 180-LI
3 611 J11 1..
min
min
A)
min
B)
C)
D)
and
12.0Ah.
Use only the chargers listed in the technical data. Only
these chargers are matched to the lithium-ion battery of
your power tool.
Do not continue to press the On/Off switch after the
power tool has automatically switched off. The battery
can be damaged.
1 609 92A 8EM | (04.01.2023)
English | 7
GBH 180-LI
V= 18
-1
0–1800
-1
0–1800
-1
0–5100
J 2
SDS plus
mm 20
mm 13
mm 30
kg 2.8–3.7
°C 0 to +35
°C –20 to +50
GBA 18V...
ProCORE18V
4.0A/8.0Ah
GAL 18...
GAX 18...
GAL 36...