Product Description And Specifications; Product Features; Technical Data; Noise/Vibration Information - Bosch GBH 180-LI Professional Notice Originale

14 | English
Take care when carrying out demolition work using
u
the chisel. Falling fragments of the demolition material
could injure you or any bystanders.
Hold the power tool firmly with both hands and make
u
sure you have a stable footing. The power tool can be
more securely guided with both hands.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is intended for hammer drilling in concrete,
brick and stone, as well as for light chiselling work. It is also
suitable for drilling without impact in wood, metal, ceramic
and plastic. Power tools with electronic control and right/left
rotation are also suitable for screwdriving.

Product Features

The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) SDS plus drill chuck
(2) SDS plus tool holder
(3) Dust protection cap
(4) Locking sleeve
(5) Button for depth stop adjustment
(6) Release button for impact/mode selector switch
(7) Impact/mode selector switch
(8) Rotational direction switch
On/Off switch
(9)
(10) Handle (insulated gripping surface)
a)
(11) Battery
(12) Worklight
a)
(13) Battery release button
(14) Auxiliary handle (insulated gripping surface)
(15) Depth stop
(16) Button for battery charge indicator
(17) Battery charge indicator
(18) Universal holder with SDS plus shank
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.

Technical Data

Cordless rotary hammer
Article number
1 609 92A 77K | (22.12.2021)
Cordless rotary hammer
Rated voltage
Rated speed
– Clockwise
– Anticlockwise
Impact rate
Impact energy per stroke ac-
cording to EPTA-Proced-
ure 05:2016
Tool holder
Max. drilling diameter
– Concrete
– Steel
– Wood
Weight according to EPTA-
Procedure 01:2014
Recommended ambient tem-
perature during charging
Permitted ambient temperat-
ure during operation
during storage
Recommended rechargeable
batteries
Recommended chargers
A) Measured at 20–25 °C with rechargeable battery ProCORE18V
B) Optimum performance with driling diameter 6−10 mm
C) Depends on battery in use
D) Limited performance at temperatures < 0 °C

Noise/Vibration Information

Noise emission values determined according
to EN IEC 62841-2-6.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 90 dB(A); sound power
level 101 dB(A). Uncertainty K = 3 dB.
Wear hearing protection!
Vibration total values a
determined according to EN IEC 62841-2-6:
a)
Hammer drilling into concrete: a
a)
Chiselling: a
a)
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
GBH 180-LI
power tool is used for other applications, with different ap-
3 611 J11 1..
min
min
A)
min
B)
mm
mm
mm
C)
D)
and
12.0Ah.
(triax vector sum) and uncertainty K
h
=15.5 m/s
h
2 2
=12.7 m/s , K=1.5 m/s
h
GBH 180-LI
V= 18
-1
0–1800
-1
0–1800
-1
0–5100
J 2
SDS plus
20
13
30
kg 2.8–3.7
°C 0 to +35
°C –20 to +50
GBA 18V...
ProCORE18V
4.0A/8.0Ah
GAL 18...
GAX 18...
GAL 36...
2 2
, K=1.5 m/s ,
,
Bosch Power Tools