Product Description And Specifications; Intended Use; Product Features - Bosch PBH 2000 RE Notice Originale

Masquer les pouces Voir aussi pour PBH 2000 RE:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 19
14 | English
surfaces do not allow for safe handling and control of the
tool in unexpected situations.
Service
Have your power tool serviced by a qualified repair
u
person using only identical replacement parts. This
will ensure that the safety of the power tool is maintained.
Hammer Safety Warnings
Safety instructions for all operations
Wear ear protectors. Exposure to noise can cause hear-
u
ing loss.
Use auxiliary handle(s), if supplied with the tool. Loss
u
of control can cause personal injury.
Hold the power tool by insulated gripping surfaces,
u
when performing an operation where the cutting ac-
cessory or fasteners may contact hidden wiring or its
own cord. Cutting accessory or fasteners contacting a
"live" wire may make exposed metal parts of the power
tool "live" and could give the operator an electric shock.
Safety instructions when using long drill bits with rotary
hammers
Always start drilling at low speed and with the bit tip
u
in contact with the workpiece. At higher speeds, the bit
is likely to bend if allowed to rotate freely without contact-
ing the workpiece, resulting in personal injury.
Apply pressure only in direct line with the bit and do
u
not apply excessive pressure. Bits can bend, causing
breakage or loss of control, resulting in personal injury.
Additional safety information
Use suitable detectors to determine if utility lines are
u
hidden in the work area or call the local utility com-
pany for assistance. Contact with electric lines can lead
to fire and electric shock. Damaging a gas line can lead to
explosion. Penetrating a water line causes property dam-
age or may cause an electric shock.
Always wait until the power tool has come to a com-
u
plete stop before placing it down. The application tool
can jam and cause you to lose control of the power tool.
Secure the workpiece. A workpiece clamped with
u
clamping devices or in a vice is held more secure than by
hand.
Products sold in GB only:
Your product is fitted with an BS 1363/A approved electric
plug with internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an au-
thorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
1 609 92A 6GM | (09.08.2021)
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.

Intended Use

The power tool is intended for hammer drilling in concrete,
brick and stone, as well as for light chiselling work. It is also
suitable for drilling without impact in wood, metal, ceramic
and plastic. Power tools with electronic control and right/left
rotation are also suitable for screwdriving.

Product Features

The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1)
Keyless chuck (PBH 2500 SRE)
(2)
SDS plus drill chuck
SDS plus tool holder
(3)
(4)
Dust protection cap
(5)
Locking sleeve
(6)
Handle (insulated gripping surface)
(7)
Rotational direction switch
(8)
Lock-on button for on/off switch
(9)
On/off switch
(10)
Impact/mode selector switch
(11)
Button for depth stop adjustment
(12)
Wing bolt of auxiliary handle
(13)
Auxiliary handle (insulated gripping surface)
(14)
Depth stop
(15)
Securing screw for keyed chuck
(16)
Keyed chuck (PBH 2100 SRE, PBH 2500 SRE)
(17)
SDS plus shank for drill chuck
(18)
Saugfix suction opening
(19)
Saugfix clamping screw
a)
(20)
Saugfix depth stop
(21)
Saugfix telescopic tube
a)
(22)
Saugfix wing bolt
a)
(23)
Saugfix guide tube
(24)
Universal holder with SDS plus shank
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
a)
a)
a)
a)
a)
a)
a)
a)
Bosch Power Tools

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Pbh 2100 rePbh 2100 srePbh 2500 rePbh 2500 sre

Table des Matières