Water Filter; Change Filter - Siemens TE506F Série Mode D'emploi

Switching off the appliance
The factory settings of the fully automatic
espresso machine are programmed for opti-
mal performance� The appliance switches
off automatically after a specific time (time
span can be programmed, see "Menu set-
tings" )�
Shut off
Exception: The appliance switches off
without rinsing if only hot water or steam
were dispensed�
To switch the appliance off manually before
e
this, press the off /
appliance rinses and switches off�
N.B.: If the appliance is being used for the
first time, a service program has been run,
or the appliance has not been operated
for a long period, the first beverage will
not have the full aroma and should not be
consumed�
When using the espresso machine for the
first time, you will achieve a suitably thick
and stable "crema" only after the first few
cups have been dispensed�
After extended use, water droplets may
form on the ventilation slots� This is normal�
j
button (13)� The

Water filter

A water filter can prevent scale buildup.
Before a new water filter is used, it must be
rinsed� To do this, proceed as follows:
1� Press the water filter (20) firmly into the
water tank with the aid of the measuring
spoon (19)�
2� Fill the water tank (17) with water up to
the max mark�
3� Press and hold the
for at least three seconds� The menu
opens�
e
4� Press the off /
edly until the display shows
�
filter
5� Select
Activate filter
rotary knob (15)�
6� Press the start button (10)�
7� Place a receptacle with a capacity of
0�5 litres under the outlet (6a)�
8� Press the start button (10)�
9� Water will now flow through the filter to
rinse it�
10� Empty the container�
The appliance is ready to use once more�
Note: Rinsing the filter simultaneously
activates the setting for the
display�
de en
e
j
off / button (13)
j
button (13) repeat-
No / Old
with the upper

Change filter!

29