Bosch CET3-10 Consignes De Fonctionnement/Sécurité page 13

CleAnInG
When cleaning a compressor be
WARNING
careful not to disassemble any
portion of the tool since internal components
may be misplaced or safety components may be
improperly mounted.
Certain cleaning agents such as gasoline, carbon
tetrachloride, ammonia, etc. may damage plastic
parts and o-rings.
Periodically clean the compressor tool with soapy
water and a damp cloth.
storAGe
When not in use, the compressor should be
disconnected and stored in a warm and dry place.
If unit is operated in an excessively dirty or dusty area, increase the frequency of all scheduled maintenance
items.
Recommendation
Check for proper oil level(s) and oil leaks
Drain moisture from tanks daily or after each use
Ensure all safety guards are correctly and securely attached
Clean the cooling surfaces of the compressor
Inspect air intake filter
Check safety valves by pulling on rings
Check system for air leaks
Change pump oil
Replace air filter
mAIntenAnCe
Coil the electric cord and place within frame for
protection.
WARNING
children and other personnel unfamiliar with
compressor operation.
Compressor can be dangerous in the hands of users
unfamiliar with its operation.
WARNING
compressors are too heavy to be lifted by one
person. Get assistance before attempting to liff
compressor to reduce the risk of injury.
When not in use, store the
compressor out of reach of
Lock the storage area.
loAdInG/unloAdInG
Use care when lifting and carrying
the compressor.
Daily Weekly Every 200 hours
x
x
x
x
x
x
x
Some
x
x
13