Oceanic OCEACLIM100W2 Guide D'utilisation page 41

N
o person carrying out work in relation to a refrigeration system which
involves exposing any pipe work that contains or has contained flammable
refrigerant shall use any sources of ignition in such a manner that it may
lead to the risk of fire or explosion. All possible ignition sources, including
cigarette smoking, should be kept sufficiently far away from the site of
installation, repairing, removing and disposal, during which flammable
refrigerant can possibly be released to the surrounding spac e. Prior to
work taking plac e, the area around the equipment is to be surveyed to
make sure that there are no flammable hazards or ignition risks. "No
Smoking" signs shall be displayed.
2.2.7 Ventilated area
E
nsure that the area is in the open or that it is adequately ventilated
before breaking into the system or conducting any hot work. A degree of
ventilation shall continue during the period that the work is carried out.
The ventilation should safely disperse any released refrigerant and
preferably expel it externally into the atmosphere.
2.2.8 Checks to the refrigeration equipment
W
here electrical components are being c hanged, they shall be fit for the
purpose and to the correct spec ific ation. At all times the manufacturer's
maintenance and service guidelines shall be followed. If in doubt consult
the manufacturer's technical department for assistance.
The following checks shall be applied to installations using flammable
refrigerants:
T
- he charge size is in accordance with the room size within which the
refrigerant containing parts are installed;
T
- he ventilation machinery and outlets are operating adequately and are
not obstructed;
I
- f an indirect refrigerating circuit is being used, the secondary circuit
shall be checked for the presence of refrigerant;
M
- arking to the equipment continues to be visible and legible. Markings
and signs that are illegible shall be corrected;