Remove Station - EVBOX Elvi Manuel D'utilisation

EN

Remove station

Tools you need to remove the station
Warning: Risk of electric shock.
Before removing the charging station from the wall
dock, make sure that the power line you're using is
switched off on your service panel. The LED ring of the
CLICK
charging plug must be off.
1
Take out the keys from the folder in the box.
Insert the keys into the slots in the bottom of the wall
dock. This releases the snap-fit connection of the
charging station to the wall dock. Make sure to push
them in until they only stick out approx. 50 mm and
cannot be pushed in any further.
Now you can remove your charging station from the
wall dock. Pull the charging station away from the wall
dock in a straight line.
Important: Do not twist or skew the charging station,
as that might damage the station's snap fits and/or
connectors.
Be aware that the charging station is still fixed on the
connector (socket) of the wall dock and it requires
some force to pull it off.
Take out the keys from Elvi wall dock.
7