Wayscral EVERYWAY E-450 Notice D'utilisation page 37

III. Regular checks
Check the tightness of the bolts: lever, crank, pedals, stems.
The tightening torques to be applied are as follows:
COMPONENTS
Pedals on crank arms
Crank arm on bottom bracket
Steering tightness
Headset tightening
Brake lever
Brake calipers
Seat
Seat post clamp
Wheel
The other tightening torques depend on the size of the nuts: M4: 2.5 to 4.0 Nm, M5: 4.0 to 6.0 Nm,
M6: 6.0 to 7.5 Nm. Tighten the screws evenly to the required torque.
Regularly check the tyres and in particular the condition of the tread on the rear tyre: wear, cuts,
cracks, pinching. Replace the tyre if necessary. Check the wheel rims for excessive wear, warping,
denting, cracks...
IV. Servicing
For safety reasons and to keep the components in good working order, you should have your bicycle
regularly serviced by your retailer. Your bicycle should also undergo regular maintenance by a qualified
technician.
First service: 1 month or 150 km
•
Verification of the tightening of the elements: crank, wheel, stem, pedals, handlebar, seat
clamp,
•
Check the power assistance system is working correctly,
•
Check and adjust the brakes,
•
Tighten and/or straighten the wheels.
Every year or 2000 km:
•
Check the wear levels (brake pads, gear system, tyres),
•
Check the power assistance system is working correctly,
•
Check the bearings (chain set unit, wheels, steering, pedals),
•
Check the cables (brakes, derailleur),
•
Check the lighting,
•
Tighten and/or straighten the wheels.
RECOMMENDED TORQUE
(Nm)
34 - 40
45 - 55
5 - 8
5 - 8
8
10
7 - 10
7 - 14
Quick clamp
37
SPECIAL INSTRUCTIONS
Lubricate the threads
Lubricate the threads