Wayscral EVERYWAY E-450 Notice D'utilisation page 35

VIII. Changing the pedals
To change your pedals, identify the pedals by looking at the letter noted on the pedal. The right pedal
is marked "R" (Right) and the left pedal is marked "L" (Left). Turn the pedal R clockwise to fix it onto
the crank arm. Turn the L pedal anti-clockwise.
IX. Wheel and engine
After the first month of use, it is advisable to tighten your spokes to limit the impact of engine traction
on your rear wheel. A slight noise may be heard when the engine is started. This noise is normal
because the engine starts and assists pedalling. This noise can become louder when in full use.
X. Luggage rack
Your bicycle is sold with a luggage rack:
Model
EVERYWAY E450
It is already fixed above your rear wheel. The fixing elements must be tightened and checked regularly
at a torque of 4 - 6 Nm. Your luggage rack is designed for a maximum load of 25 kg and a child seat can
be attached to it.
WARNING: your luggage rack is not designed to pull a trailer.
For safety reasons, luggage must only be carried on the luggage rack.
When the luggage rack is loaded, the bearing of your bicycle changes.
Spread the luggage load equally on both sides to help keep your bicycle stable. All luggage must be
securely stowed on the luggage rack, before each use it is important to check that nothing is hanging
in the void and risks being caught in the rear wheel of the bicycle. Do not make arbitrary adjustments
to the luggage rack; please ask your retailer for advice if you need to have it adjusted. Do not make
modifications to the luggage rack; any modification of the luggage rack by the user will invalidate these
instructions. Luggage should not obscure the reflectors and lights on your bike.
XI. Kickstand
Before each use, make sure that your stand is folded up.
Bike size
28"
35
Luggage rack
SW-CA463SB