Bosch GSR18V-1330C Consignes De Fonctionnement/Sécurité page 15

2610056705 GSB18V-1330C 04-21.qxp_GSB18V-1330C GSR18V-1330C 5/3/21 7:00 AM Page 15
Rapid Mode Selector
The rapid mode selector (6) allows the tool
to be set for various drilling or driving
applications. Turn the rapid mode selector
right or left depending on the below
applications (Fig. 10).
FIG. 10
Drill only action: This mode will lock
up the clutch to permit drilling and
driving heavy duty work, and also will
enable bits to be changed quickly and
easily in the keyless chuck.
Driver mode: To drive screws, nuts,
and bolts with use of the adjustable
clutch settings to limit torque and
power output to prevent over driving
and fastener/workpiece damage..
Drill with
(GSB18V-1330C Model only): For
drilling in concrete, asphalt, tile or
other similar hard materials. The
hammer drill position overrides the
clutch for drilling.
Operating Instructions
(6)
hammer action
Adjustable Clutch
Your tool features 25 clutch settings.
Output torque will increase as the clutch
ring (5), is rotated from 1 to 25. The tool
will stop rotating as soon as the set torque
is reached during operation (Fig. 11).
FIG. 11
(5)
Brake
When the trigger switch is released it
activates the brake to stop the chuck
quickly. This is especially useful in the
repetitive driving and removal of screws.
15