Bosch GSR18V-1330C Consignes De Fonctionnement/Sécurité page 12

2610056705 GSB18V-1330C 04-21.qxp_GSB18V-1330C GSR18V-1330C 5/3/21 7:00 AM Page 12
4X Bit Tip Holder
Longer bits could interfere with proper tool
operation and result in user injury.
The four piece bit tip holder (15) can be
used for convenient on tool storage of your
most commonly used bits.
When mounting bit holder accessory,
mount on the side of the drill opposite the
belt clip.
Always make sure you securely tighten the
mounting screw before use. (Fig. 5).
A
H ND
GRIP
FIG. 6
Assembly
Store only bit tips in the
on-tool bit holder.
E
SLEEVE
B
COLL R
Auxiliary Handle
The tool must be supported with the
auxiliary handle during operation.
To mount the auxiliary handle on the tool
loosen the hand grip (A). Pull on the sleeve
(B) and slide the collar on to the tool as
shown (C). Swivel the handle to desired
position (D). Secure the handle in place by
tightening the hand grip (E). See Fig. 6.
To remove the handle for transportation or
storage reverse the steps above.
D
C
12
FIG. 5
(15)