Installing The Tv On The Wall - Sony SU-WL450 Informations D'installation

Installing the TV on the wall

1
Lift the TV.
 For the location of the Pulleys  to the
hang on the Base or Base Adaptor, refer
to the table of step 3 in "Deciding on the
installation location" on page 7.
 Make sure that the rear of the TV
touches the Base or Base Adaptor when
holding the TV.
Note
 Hold the TV securely with both hands.
2
Install the TV onto the Base or
Base Adaptor.
 Gently slide down the TV and hang the
Pulleys  attached to the rear of the TV
to the Base or Base Adaptor, making
sure to confirm the shape of the holes.
 After installing the TV on the wall,
confirm the Pulleys  are firmly latched
into the Base or Base Adaptor.
 Release both hands slowly to ensure
that the TV does not fall.

− 10 (GB) −
2-a


