Klarstein WATERFALL Mode D'emploi page 23

Waveform of natural wind
Strong
Medium
Weak
High speed:
Medium speed
Low speed
5. Direction button : in power on state, press this button to turn on/off swing
function, and the corresponding indicator displays its function; press this
button to turn on swing function and the swing indicator turns on; press it
again to turn off swing function;
Cool/Humidify button
6.
cooling/humidification, and the corresponding indicator displays its function;
Timer button
7. : after connecting the power, the timer function is turned off in
initial state, and the digitron displays 0; after turning on, press this button to
switch among OFF, 1, 2, 3......9, and the digitron of corresponding level also
changes accordingly: "0" on → "1" on→ "2" on→ "3"on→ ......"9" on→ "0" on.
No memory is saved after restart, and changes back to "0";
8. Water shortage protection
off (lacking water) for 5 seconds continuously when the water pump has been
working for 50 seconds, the water pump stops working; and the buzzer beeps
10 seconds.
Rear net protection switch
9.
working, the power supply will be disconnected.
If the rear net is not installed, the switch is in off state, the power input is cut off,
and the device enters standby state;
30 minutes high speed natural wind -30 minutes
medium speed natural wind - low speed natural wind
(hold)
Medium speed: 30 minutes natural wind - low speed
natural wind (hold)
Low speed natural wind
: in power on state, press this button to turn on/off
: If the software detects water protection switch
: If the rear net is opened when the device is
EN
23