Klarstein WATERFALL Mode D'emploi page 27

Water tank cleaning
1. Cut off the power and rotate the water tank lock to horizontal direction, then
take the water tank out.
2. Use the towel to clean the incrustation of the water tank by cleanser, and then
use water to wash and pour the dirty water out.
Machine body cleaning
1. Use wet towel to clean the machine body, washing by water directly is
forbidden.
2. Do not wash by corrosive cleanser or solvent.
3. The power should be off and power cable should be pulled out when cleaning
the machine body, or there is electric shock risk.
Installation after cleaning
1. Install the air filter net, wet curtain assembly and water tank orderly and
ensure the installation is correct.
2. Link the power and confirm the machine runs smoothly.
Maintenance
1. If the machine has not been used for a long time, the power cable should be
pulled out and the machine should be packed to prevent dust.
2. Please ensure the wet curtain and air filter net is dry and there is no water in
the tank before packing.
EN
27