Steam Bake Mode - LG WCES6428F Manuel Du Propriétaire

Masquer les pouces Voir aussi pour WCES6428F:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

us_main.book.book Page 54 Monday, January 3, 2022 8:42 AM
54 OPERATION
5
Assemble the cover or snap closed the fill lid.
Tank cover
a
Fill lid
b
CAUTION
• Make sure the steam feeder tank cover and fill
lid are closed before putting the tank in the
oven.
• Use potable water only.
• Do not fill the steam feeder tank with any fluid or
mixture other than water.
• Do not fill the steam feeder tank with hot water.
• Fill the steam feeder tank up to the line indicated
on the front.
• Do not tilt the steam feeder tank while it is full.
• Discard any remaining water and clean the
steam feeder tank after cooking.
• Use the steam feeder tank only for its intended
purpose of providing water for steam cooking.
• Monitor the water level in the tank and refill as
needed for steam cooking. Use oven mitts to
avoid burns when handling the hot tank.
6
Carefully insert the tank into the steam feeder
slot, making sure to keep the tank level while
carrying it. If the tank is not kept level, water
will drain out of the tubes in the back.
7
Slide the tank into the slot until it clicks into
place.

Steam Bake Mode

The Steam Bake mode heats food gradually, using
both the oven heating elements and moist steam
heat. The oven can be programmed to cook at any
temperature from 210 ℉ (100 ℃) to 550 ℉ (285 ℃).
Preset temperature options start at 350 ℉ (175 ℃).
Setting Steam Bake Mode
1
Touch Steam Cook in the Cooking Modes
screen.
2
Touch Steam Bake in the display.
3
Select the desired temperature and steam
level: Low, Medium, or High.
4
If desired, scroll to set the cook time and
delayed start time. Touch the arrow key on
the right side of the display to see the delayed
start time settings.
5
Touch Start.
6
Once cooking is finished, allow the oven to
cool completely. Then wipe up any water left
on the oven interior.
NOTE
• Once Steam Bake cooking is started, an indicator
on the display shows the status of the steam
function.
• Make sure the steam feeder tank is filled with
water before starting the Steam Bake mode. If
the water in the tank runs out during cooking, a
chime sounds and a popup appears in the
display. The oven continues to cook without
steam.
• Remember to drain the steam feeder tank after
use.
• When the temperature rises in the oven, steam
may not be visible.
• It is normal to hear the sound of boiling water
from the steam generator while running the
steam functions.
Changing the Steam Cook Settings
1
Touch Edit in the display to bring up the Cook
Settings screen.

Publicité

Table des Matières
loading

Table des Matières