Recommended Probe Guide - LG WCES6428F Manuel Du Propriétaire

Masquer les pouces Voir aussi pour WCES6428F:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

us_main.book.book Page 46 Monday, January 3, 2022 8:42 AM
46 OPERATION
• For thin cuts of meat, insert probe in thickest
side of meat.
Using the Meat Probe Feature
CAUTION
• Always use an oven mitt to remove the
temperature probe. Do NOT touch the broil
element. Failure to follow this warning can result
in severe personal injury.
• To avoid damage to the meat probe, do not use
tongs to pull on the probe when removing it.
• Do not store the meat probe in the oven.
1
Insert the probe into the food.
2
Connect the probe to the jack in the oven.
"Probe is connected" pops up in the display
and the probe icon appears at the top of the
display.
Probe icon
3
Touch an appropriate cooking mode.
4
Set the oven temperature and the probe
temperature. Scroll through the numbers on
the display or touch the number pad icon to
enter the numbers directly.
• The default probe temperature is 150 ℉ (65
℃), but can be changed to any temperature
between 80 ℉ (27 ℃) and 210 ℉ (100 ℃).
Number pad icon

Recommended Probe Guide

Recommended Probe Placement Chart
Category
Ground Meat & Meat Mixtures
5
If desired, set the delayed start time using the
same method. Touch the arrow key on the
right side of the display to see the additional
settings.
6
Touch Start. If a delayed start time has been
set, the start time appears in the display.
7
When the set probe temperature is reached,
the oven shuts off automatically.
NOTE
• Calculating a total cooking time by weight is no
longer necessary using this feature. See the
Recommended Probe Temperature Chart to set
the probe temperature.
Changing the Probe Temperature
while Cooking
1
Touch Edit in the display to bring up the Cook
Settings screen.
2
Adjust the settings as desired.
3
Touch Start.
To Stop Cooking
Touch Stop in the display, and select Yes.
NOTE
• Touch Stop in the display at any time to cancel a
cooking operation.
• To avoid breaking the probe, make sure food is
completely defrosted before inserting.
• While the meat probe mode is running,
SpeedClean does not respond.
Examples of Food
Meatloaf
Meatballs
Probe Placement
Insert in the thickest part

Publicité

Table des Matières
loading

Table des Matières