Factory Data Reset; Open Source License; Oven Cooling; Timer - LG WCES6428F Manuel Du Propriétaire

us_main.book.book Page 19 Monday, January 3, 2022 8:42 AM
1
Touch Settings at the center bottom of the
Main screen, swipe to the third Settings
screen, and touch Demo Mode.
2
Select either the ON or OFF mode.
3
Touch OK.
DEMO
NOTE
• When Demo Mode is on, the appliance will not
heat up.
• The oven Demo Mode icon appears in the
display if the Demo Mode is on.

Factory Data Reset

This function returns all settings to the factory
defaults.
CAUTION
• All stored data will be deleted.
1
Touch Settings at the center bottom of the
Main screen, swipe to the fourth Settings
screen, and touch Factory Data Reset.
2
If you want to reset data to the factory
defaults, touch RESET and then OK.

Open Source License

This screen displays a list of the open source
software contained in this product. Refer to the
indicated licenses for the terms and conditions of
their use.
1
Touch Settings at the center bottom of the
Main screen and swipe to the fourth Settings
screen.
2
Touch Open Source License.
06:21
AM

Oven Cooling

The oven cooling icon appears in the display if the
temperature inside the oven is high during or after
operation. The icon disappears if the oven
temperature is below 210 ℉ (100 ℃).
10:25

Timer

The oven timers don't affect oven operation or
cooking time. Use them as extra kitchen timers.
Once the time runs out, the oven chimes and
"Timer 1 or 2 finished" appears in the display.
Setting the Timer
1
Touch either clock icon at the bottom of the
display.
Clock icon
2
Scroll through the numbers in the popup until
the desired time appears in the display, or
touch the number pad icon to enter the
numbers directly, and touch OK.
Number pad icon
3
The time remaining appears next to the clock
icon in the display.
OPERATION 19
AM
9:20
PM