Maintenance And Service; Maintenance And Cleaning; After-Sales Service And Application Service - Bosch GML 20 Professional Notice Originale

OBJ_BUCH-1181-004.book Page 19 Tuesday, April 19, 2016 1:24 PM
Cause Corrective Measure
Construction site radio suddenly inoperative
Mains plug or battery not Plug in mains plug or battery
properly or completely properly or completely
plugged in
Software error To reset the software, pull the
mains plug and remove the
battery; wait 30 seconds,
then insert mains plug and
battery again
Bad radio reception
Interference from other de- Position the construction site
vices or insufficient set-up radio at another location with
location better reception or with
greater clearance to other
electronic devices or socket
outlets.
Time indication faulty
Back-up batteries of clock Replace back-up batteries
empty
Back-up batteries incorrectly Insert back-up batteries
inserted (wrong polarity) correctly
When the corrective measures do not eliminate an error,
please contact an authorised service agent for Bosch power
tools.

Maintenance and Service

Maintenance and Cleaning

 The mains cable is provided with a special safety con-
nection and may only be replaced by an authorised ser-
vice agent for Bosch power tools.

After-sales Service and Application Service

Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. Exploded views and information on spare parts can al-
so be found under:
www.bosch-pt.com
Bosch's application service team will gladly answer questions
concerning our products and their accessories.
In all correspondence and spare parts orders, please always
include the 10-digit article number given on the type plate of
the construction site radio.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
Bosch Power Tools
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Inside New Zealand:
Phone: (0800) 543353
Fax: (0800) 428570
Outside AU and NZ:
Phone: +61 3 95415555
www.bosch.com.au
Republic of South Africa
Customer service
Hotline: (011) 6519600
Gauteng – BSC Service Centre
35 Roper Street, New Centre
Johannesburg
Tel.: (011) 4939375
Fax: (011) 4930126
E-Mail: bsctools@icon.co.za
KZN – BSC Service Centre
Unit E, Almar Centre
143 Crompton Street
Pinetown
Tel.: (031) 7012120
Fax: (031) 7012446
E-Mail: bsc.dur@za.bosch.com
Western Cape – BSC Service Centre
Democracy Way, Prosperity Park
Milnerton
Tel.: (021) 5512577
Fax: (021) 5513223
E-Mail: bsc@zsd.co.za
Bosch Headquarters
Midrand, Gauteng
Tel.: (011) 6519600
Fax: (011) 6519880
E-Mail: rbsa-hq.pts@za.bosch.com
English | 19
1 609 92A 2NE | (19.4.16)