Controls And Adjustment Engine; Clutch; Brakes; Differential Lock - Bertolini 316 Utilisation Et Entretien

CONTROLS AND ADJUSTMENT
ENGINE
For checking the engine and its related parts,
consult the Use and Maintenance Manual
enclosed. Have adjustments made only at
service centres authorised by the engine
manufacturer.

CLUTCH

(Fig. 16)
The clutch lever (2) must have a stroke of ap-
proximately 5 mm. before the clutch begins
to disengage. If the stroke is less or higher
than the distance just mentioned, adjust by
turning the adjustment screw (B) placed near
the lever. Lock nut (A) after adjustment

BRAKES

(Fig. 17)
The brake levers (4-5) must have a stroke of
approx. 5 mm before engaging. If the
stroke of the levers is less or higher than the
distance just mentioned, adjust by turning
the adjustment screw (A) placed near the
levers Lock nuts (B) after adjustment.
STEERING COLUMN ROTATION LEVER
Use lever 10 to unlock the column (Fig. 17).
Should it not move, loosen nut C and use
adjuster D.

DIFFERENTIAL LOCK

(Fig 18)
If the differential lock device remains enga-
ged when lever 11 has been put in idle, adjust
by turning adjuster A
Fig.16
Fig.17
Fig.18
52