Safety Devices; Engine Stop; Clutch Hook; Power Take-Off Hindrance Device - Bertolini 316 Utilisation Et Entretien

4) Pull lever 10 ( Fig. 2 ) and rota-
te the column in anti-clockwise direc-
tion (leftwards), as shown in Fig. 7/B.
5) Bring lever 10 back to its original position
to thus lock the column.
6) Put handles back on support S.
N.B. - To bring the handlebars / column back
to normal position (tilling), repeat the same
operations whilst turning the handlebars/
column in clockwise sense (rightwards) as
shown in Fig. 7/A.
IMPORTANT - each time the handlebars
are turned through 180°, always move the
Reversing Gear control lever:
Position a - Front implement version
cultivator (Fig. 8)
Position b - Rotary hoe version cultivator
(Fig. 8)
N.B. - To facilitate invertor engagement,
engage the IV gear and whilst pulling the
clutch, perform small to and fro movements
with the wheels.

SAFETY DEVICES

The Motorcultivators are equipped with
several safety devices, which are:
1) Engine Stop "MOTORSTOP"
The working position of the Motorstop
control lever 1 is shown in Fig. 9. If, for any
reason, the handlebars are released from the
operator's hands, lever 1 will automatically
adopt the position shown in Fig. 10 and thus
stop the engine.

2) CLUTCH HOOK

With clutch hook C (Fig 11 ) inserted, any
power transmission with gears engaged will
be prevented.
3) POWER TAKE-OFF HINDRANCE
DEVICE
The motorcultivators are equipped with a
device, fitted inside the gearbox, that controls
the engagement of the Reverse Gear and
the P.T.O. Each time the Reverse Gear is
engaged, the P.T.O. is disengaged and
vice versa.
Fig.8 A
Fig. 9
Fig. 10
Fig. 11
48
Fig.8